AtHeight app icon

No more flicking between apps.

One screen instead of
ten weather apps.

AtHeight brings every available weather model for your site into one view – calculated at the height you’re actually working at. Checking them against real measurements shows which models you can trust on that site. What you get: a clear traffic light for every working hour, your work window and a daily report for the paperwork.

  • Up to 16 models in one view
  • Accuracy checked against 30 days of measurements
  • Traffic light set to your limits
WTG Pöttelsdorf 3 · Working zone 80–140 m · Rope access Updated 06:12

Work window

    Decision support, not a sign-off: the supervisor makes the call. Measure the wind on site.

    Values for

      Give it a go: switch the day, tap an hour, turn on coating mode.

      Why AtHeight

      Comparing ten sources?
      Not any more.

      You know the drill: wind app, rain radar, model charts, weather station, warnings – and in the end it still comes down to gut feel. AtHeight puts every available weather model in one view and looks back over the past weeks: which models got it right at your site?

      Until now

      • Wind app
      • Gust forecast
      • Rain radar
      • ICON model chart
      • ECMWF model chart
      • AROME model chart
      • Weather station
      • Severe weather warning
      • Temperature & dew point
      • Notes for the report

      Ten sources, all for 10 metres above the ground – and not one tells you which to trust.

      With AtHeight

      1. Every model at a glanceUp to 16 weather models for your site – calculated at your working height, overlaid in one chart.
      2. Which one’s most accurate here?The model check compares the last 30 days of forecasts with real measurements from the nearest station.
      3. A clear callA traffic light for every working hour, worked out from your limits and fixed rules. Plus the work window and a daily report.
      See how it works
      16weather models at a glance – DWD, ECMWF, Météo-France, MeteoSwiss, GeoSphere, Met Office, NOAA and more.
      30 dayschecked against real measurements, so you can see which model is most accurate at your site.
      1 viewTraffic light, work window and daily report – instead of ten open tabs.

      01 · What do the models say?

      Every model.
      One view.

      A single weather app shows you one model – and doesn’t tell you how uncertain it is. AtHeight overlays all the models, calculated at your working height. The white line is the median, the shaded band the spread from the calmest to the windiest model. Narrow means reliable. Wide means take a closer look.

      Wind at 140 m · all models Median Spread Limit 12 m/s

      Quick select:

      Try it: tap a model to show or hide it. Solid = high resolution, dashed = global model.

      • Spread, not a single numberYou don’t just see how strong the wind will get – you see how certain that is.
      • Ten apps in one viewNo more jumping back and forth: ICON-D2, AROME, ECMWF and the rest sit right on top of each other.
      • Most accurate firstTap “Best rated” to see the models that perform best at your site.

      02 · Which model to trust?

      Which model gets it
      right at your site?

      In a valley, on a slope or on a ridge, not every model performs equally well. For your site, AtHeight compares the day-ahead forecasts from the last 30 days with the nearest weather station. So you don’t just know what the models say – you know which ones you can trust at that location.

      • Real measurements: stations from DWD and GeoSphere Austria – only your working hours are assessed.
      • Groups, not false precision: good, middle or clearly worse. If they’re all equally good, that’s exactly what it says.
      • Hits on windy hours: what matters most is whether a model picks the windy hours correctly.
      • Ready to use: show “Best rated” in the chart, or switch off weak models for that site.

      03 · Where does it get tight?

      Every model.
      Every hour.
      One grid.

      The chart shows the trend, the matrix shows the detail: each model in a row, each hour in a column, with the median of all models underneath. Five views at a tap – wind, gust, rain, humidity and cloud. You can see straight away which model goes over the limit when, and plan the critical tasks around those hours.

      Amber from 75% of your limit, red only above it – the same rule as the traffic light and the daily report.

      • Spot outliers at once: a red row is one model, a red column is a critical hour.
      • No model gets hidden: if even one is over the limit, the traffic light goes to CHECK.
      • Rain by intensity, with a thunderstorm signal for each model. An amber outline shows where rain starts to count for the traffic light.
      • Humidity and cloud for each model, with sun or moon depending on the time of day – for information only, the traffic light stays the same.
      • Tap a cell to pick the hour – values, compass and height profile follow.
      • Ensemble scenarios show how likely an outlier really is.

      04 · From when until when?

      Your work window.
      At the height you’re hanging.

      Calm on the ground, blowing a gale up top – anyone who works at height knows it. AtHeight calculates the model values at your working height, whether that’s a tower, a facade or a turbine. Hour by hour you can see when you can go up and when you need to be back down. So you can line up travel, crew and gear with the weather in good time.

      Work window · Today Updated 06:12

      Wind at working height · m/s Mean Gust Limit

      Hours in detail · Today

      Height profile · 13:00 · m/s

      Set your limits – traffic light, work window and overview recalculate straight away.

      • Choose your accessGround, platform or working height only – the limits adjust to suit.
      • Overnight coveredAn alert when ropes or a platform stay rigged overnight.
      • Summary barThe work window stays in view as you scroll.

      05 · Are we good to go today?

      One look.
      One clear call.

      The traffic light checks every working hour against your limits for mean wind, gusts, rain and temperature – plus thunderstorm signal and thunderstorm energy (CAPE), scenarios that run too windy, and official warnings of storms, thunderstorms, black ice, snow or heavy rain. Fixed rules, not a black box: every rating comes with its reasons and can be explained to anyone – the crew as much as the client.

      06 · Is it dry enough?

      Dew point covered.
      Coating with a plan.

      In the morning there’s moisture in the air: ropes and surfaces get wet, resin and paint don’t cure properly. AtHeight shows temperature at working height, dew point and humidity in one chart – and underneath, hour by hour, how much margin is left to the dew point.

      Temperature · 80 m & humidity

      Today · Thu 29/10

      Dew point per working hour

      Coating modeFor resin, paint or laminate. Applies per site to every forecast day.
      Limits from the data sheet

      Without coating mode, humidity, dew point and cloud are for information only – the traffic light goes by wind, rain, thunderstorms and temperature. With the STOP box ticked, the report lists “STOP for coating only” separately.

      07 · Everything else that counts up top

      Built by people
      who work on the ropes.

      AtHeight comes out of the day-to-day work of a rope access team on wind turbines, towers and facades. It has what actually matters up there – and nothing that’s just for show.

      Wind direction & lee side

      Wind direction across the day, weighted by wind strength. AtHeight flags shifts of 45° or more and shows which side is sheltered. In light winds you get an honest note instead of false precision.

      Rain & thunderstorms

      Rain trend in plain words, thunderstorm signal from the models, radar with a wind arrow for the selected hour.

      Temperature & dew point

      Your own minimum temperature per site – below it the traffic light goes to STOP. Plus an alert when condensation or fog is likely at working height.

      7-day outlook

      Which day suits – with a heads-up on dew and coating.

      Your sites

      Locations with working height and limits – set up once, star it and pull it up every day.

      Offline & as an app

      Add it to your home screen – the last update stays available with no signal. Works with gloves on.

      Units & language

      m/s, km/h or knots – in English or German.

      Overnight covered

      Ropes or a platform staying rigged overnight? With a note on the risk of damage.

      Since last update

      What’s changed since you last looked – in one sentence.

      Verifiable down to the raw file

      No number you just have to take on faith: every model links straight to the raw data of the weather query (JSON or CSV). You can also save the daily report as a file – a checking script independently recalculates wind at working height, gust, direction and median and flags any discrepancy. Every new version of AtHeight goes through an automated test first.

      08 · Is it on record?

      One daily report.
      Everything on record.

      When the client asks why nobody worked yesterday, the answer is already in the file. One click turns the forecast into a clear daily report on a single A4 page, with everything that counts:

      Site & working heightProject & clientCrew & supervisorTaskTraffic light & reasonsWork windowHourly valuesLimitsModels & agreementCoating, if activeDecisionSign-off on siteData timestamp & checksum
      • Print or save as PDF – and keep the raw data as a file as well. A checksum proves that the report and the file belong together.
      • Records the forecast at the time of sign-off – still traceable months later.
      • Standby time on record: the weather downtime log shows the days lost to weather, for the client and for invoicing.
      Try the decision:

      09 · Who it’s for

      For everyone who works up high.

      Wind farm, bridge or facade: wherever the wind decides how the working day goes, AtHeight helps you plan it.

      Wind farm services

      Blade repair, inspection, nacelle and tower work.

      Rope access

      Rope access work on towers, bridges, facades and industrial sites.

      Cranes & rigging

      Lifting and installation work where gusts decide the plan.

      Roofing & facades

      Roofing, facade work, glazing and window cleaning – calculated at your working height.

      Gut feel is good.
      Data is better.

      Try AtHeight on your next job: we’ll set you up with a free demo version on request. For crews and commercial use, we’re happy to put together a quote.

      FAQ

      Good to know.

      Does AtHeight replace measuring on site?

      No. AtHeight is a planning aid. The sign-off is always made by the supervisor on site – with a measurement. Every report says so too.

      Where does the weather data come from?

      From the models of national weather services and centres, including DWD (ICON-D2, ICON-EU), ECMWF, Météo-France (AROME), MeteoSwiss, GeoSphere Austria, Met Office and NOAA. We only use official model data, nothing from weather portals.

      Does an AI decide whether we work?

      No. The traffic light follows fixed, transparent rules based on your limits. That way every rating in the report can be explained.

      Do I need to install anything?

      No, AtHeight runs in the browser on laptop, tablet and phone. If you like, add it to your home screen as an app – then the last update is available offline too.

      Does it work for jobs that aren’t on a wind turbine?

      Yes. Untick “Work on a wind turbine” and AtHeight simply calculates for your working height – for facades, bridges, cranes or roofs.

      Is AtHeight available in English?

      Yes. Tap “EN” at the top of the app to switch the interface to English – handy for international crews. The traffic light and rules stay the same.

      Do humidity and cloud count towards the traffic light?

      No, they’re only displayed – in the matrix and the temperature chart. The exception: you turn on coating mode and choose “traffic light to STOP”. The report then lists “STOP for coating only” separately, so it’s clear the weather itself is fine.

      What does AtHeight cost?

      We provide a free demo version for testing on request. For use across your crew and commercial use, we’ll put together a quote – just get in touch.

      10 · Getting started

      Up and running in three minutes.

      1. 1

        Tap your site on the map

        Search for the location, drop the pin, enter working height and access – star it for tomorrow.

      2. 2

        Confirm your limits

        From your risk assessment or SWMS, or the manufacturer’s specs. Only then does the traffic light give a rating.

      3. 3

        Check it in the morning

        Traffic light, work window, daily report. Measure on site – and get going.

      11 · Across the crew

      Share a site.
      One scan does it.

      Saved sites now go from phone to phone: location, working height and your limits as a QR code or link. Whoever scans it has the site in their own app straight away – no typing.

      • Show a QR code or send a linkThe ground crew scans it, the team on the ropes has the same values.
      • Back up all your sitesSend yourself one link – and after switching devices, everything’s back.
      • Just paste itPaste a link, a whole message or a code into the app and AtHeight recognises the site.
      • Stays with youThe data sits in the link itself and never goes to a server. Access details are never shared.
      6:21●●●

      Share current site

      WTG Pöttelsdorf 3Hub 140 m · limits 12 / 15 m/s

      Access details are never shared.